Overview of Functions

This function assigns a curve library created into a line object or an alignment on the work plane.

Details of Functions

This function selects the method to assign a curve library.

By Layout: Assign a curve library to alignment in a layout. The assigned Curve library will be updated based on the alignment in the layout.
By Select: Assign a curve library to a line object.
By Draw: Draw a line and at the same time assigns a curve library to the line. The draw function comes with some of the sketch functions.
Layoutwise: If it is checked on, the whole alignment will be selected as one line and a curve library will be assigned to the whole layout.

Define the constraint relationship (Offset, Rotation) between a Curve library and a line object that will be assigned.

Options
The options below are activated when ‘Assign library> By Layout or By Select’ is selected.
- From Start: Assign a curve library in a forward direction (from the start to the end).
- From End: Assign a curve library in a backward direction (from the end to the start).
Offset-y: Apply offset value in the y-axis based on the line to assign.
Offset-z: Apply offset value in the z-axis based on the line to assign.
Rotation-x: Input the rotation angle in the x-axis(Based on the positive direction of a line object to be assigned).
Rotation type
- All: Rotate all Beta angles of offset curves and single curve constraints in each object respectively.
- Rot. Offset: Only rotate the offset curve for each object in a curve library.
- Rot. Obj.: Only rotate the Beta angles of the single curve constraint.